10 Steps to Prolong Your Pool Pump's Life

pump maintenance swimming pool pump

The sparkling water, the cool dip: your swimming pool gives you endless summer fun. But keeping it clean takes a workhorse behind the scenes, your pool pump. Good maintenance keeps your pump running smoothly and efficiently all season, and it saves you money on repairs and replacements down the road.

At ASAP Pump, we like keeping your pool in top shape. Here are 10 tips to get the most out of your swimming pool pump:

  1. Prime it properly. Before starting the pump after it's been off for a while, make sure it's primed. That means filling the pump housing with water so air doesn't get into the system. Air pockets cause cavitation, which wears away parts and cuts efficiency. Check your pump's manual for its priming steps.
  2. Skim regularly. A clogged skimmer basket makes the pump work harder and wear out sooner. Try to skim your pool daily, especially in spring and fall when debris is heaviest. Removing leaves and twigs keeps them from clogging the pump basket and impeller.
  3. Clean the pump basket. The basket inside the pump housing catches leaves, hair and other debris before it reaches the impeller. Clean it weekly, or more often if needed, and check it for cracks or damage.
  4. Watch the water level. Running the pump with low water can overheat it and cause early failure. The pump needs water to stay cool and lubricated. Keep the water between the fill lines on your skimmer.
  5. Watch for leaks. Even a small leak can eventually let water into the motor and ruin the bearings and electrical windings. Check your pump and equipment for wet spots around the pump base or a musty smell.
  6. Watch the pressure gauge. The gauge shows how well water is flowing through the system. A big rise or drop in pressure can mean a clogged filter or a problem with your equipment. If it changes suddenly, check your equipment and your pump's manual.
  7. Turn it off in heavy rain. Heavy rain can overwhelm your filter system and raise the risk of water getting into the motor. Turn the pump off during heavy downpours.
  8. Beat the heat. On very hot days, set your timer so the pump runs in the early morning hours. The motor can then cool down before the hottest part of the day, which lowers the risk of overheating.
  9. Use the right chemical levels. Too much or too little chlorine or other chemicals can damage the pump. Ask your pool care professional about the right levels.
  10. Keep the motor area clean. Debris around the motor blocks airflow and cooling, which leads to overheating. Keep the area around the motor clear.

Follow these simple tips and your pool pump will run efficiently for years. A well-kept pump saves you money on electricity, repairs and replacements, so you can spend your time enjoying a clear pool all summer.

For all your pool pump needs, ASAP Pump is here to help. Bring your pump to our shop at 3207 E President St, Tucson, call (520) 889-9145, or send us a message.

Happy swimming!

Related: Pool Pumps · Extending the Life of Your Pump Motor

Call now: (520) 889-9145
Español (520) 889-9145